Inhaltszusammenfassung für eQ-3 homematic IP HmIPW-WTH
Seite 1
All manuals and user guides at all-guides.com Installations- und Bedienungsanleitung Installation instruction and operating manual Wired Wandthermostat mit S. 2 Luftfeuchtigkeitssensor Wired Wall Thermostat with p. 44 Humidity Sensor HmIPW-WTH...
All manuals and user guides at all-guides.com Inhaltsverzeichnis Hinweise zur Anleitung ...........9 Gefahrenhinweise ............9 Funktion und Geräteübersicht ........12 Allgemeine Systeminformationen ......14 Inbetriebnahme .............. 14 Installationshinweise ............14 Installation ................17 Montage in Mehrfachkombinationen ......18 Anlernen ................19 5.4.1 Anlernen an den Homematic IP Wired Fußbodenheizungsaktor ........
Seite 10
All manuals and user guides at all-guides.com Auswahl der gewünschten Temperaturanzeige ... 36 Konfiguration des Fußbodenheizungsaktors ....37 6.10 Verbindungstest ..............38 Bedienung ................38 Fehlercodes und Blinkfolgen ........39 Wiederherstellung der Werkseinstellungen ....41 10 Wartung und Reinigung ..........41 Technische Daten ............42...
Hinweise zur Anleitung All manuals and user guides at all-guides.com Hinweise zur Anleitung Lesen Sie diese Anleitung sorgfältig, bevor Sie Ihr Home- matic IP Wired Gerät in Betrieb nehmen. Bewahren Sie die Anleitung zum späteren Nachschlagen auf! Wenn Sie das Gerät anderen Personen zur Nutzung über- lassen, übergeben Sie auch diese Anleitung.
Seite 12
Gefahrenhinweise All manuals and user guides at all-guides.com Verwenden Sie das Gerät nicht, wenn es von au- ßen erkennbare Schäden, z. B. am Gehäuse, an Bedienelementen oder an den Anschlussbuchsen ausweist. Lassen Sie das Gerät im Zweifelsfall von einer Fachkraft prüfen. Betreiben Sie das Gerät nur in trockener sowie staubfreier Umgebung, setzen Sie es keinem Ein- fluss von Feuchtigkeit, Vibrationen, ständiger...
Seite 13
Gefahrenhinweise All manuals and user guides at all-guides.com Das Gerät ist Teil der Gebäudeinstallation. Bei der Planung und Errichtung sind die einschlägigen Normen und Richtlinien des Landes zu beachten. Das Gerät ist ausschließlich für den Betrieb am Homematic IP Wired Bus vorgesehen. Der Homematic IP Wired Bus ist ein SELV-Stromkreis.
Funktion und Geräteübersicht All manuals and user guides at all-guides.com Jeder andere Einsatz, als der in dieser Bedie- nungsanleitung beschriebene, ist nicht bestim- mungsgemäß und führt zu Gewährleistungs- und Haftungsausschluss. Funktion und Geräteübersicht Mit dem Homematic IP Wired Wandthermostat können Sie Ihre Fußbodenheizung in Verbindung mit Homematic ...
Seite 16
Funktion und Geräteübersicht All manuals and user guides at all-guides.com Displayübersicht (s. Abbildung 2): Soll-/Ist-Temperatur Luftfeuchtigkeit Warnung für Betauung Fenster-auf-Symbol Funkübertragung Boost-Funktion Manueller Betrieb Automatikbetrieb Urlaubsmodus Heizen Kühlen Bediensperre Soll-Temperatur Alle weiteren Symbole finden Sie im Kapitel „6 Betriebsmodi und Konfiguration“ auf Seite 26.
Welcher Funktionsumfang sich innerhalb des Systems im Zusammenspiel mit weiteren Komponen- ten ergibt, entnehmen Sie bitte dem Homematic IP Wired Systemhandbuch. Alle technischen Dokumente und Up- dates finden Sie stets aktuell unter www.eQ-3.de. Inbetriebnahme Installationshinweise Da der Bus vom Homematic IP Wired Access Point (HmIPW-DRAP) gespeist wird, müssen Sie...
Seite 18
Inbetriebnahme All manuals and user guides at all-guides.com Beachten Sie die auf dem Gerät angegebene Ab- isolierlänge der anzuschließenden Leiter. Beachten Sie bei der Installation die Gefahrenhin- weise gemäß „2 Gefahrenhinweise“ auf Seite 9. Hinweis! Installation nur durch Personen mit einschlägigen elektrotechnischen Kenntnissen und Erfahrungen!* Durch eine unsachgemäße Installation gefährden Sie...
Seite 19
Inbetriebnahme All manuals and user guides at all-guides.com lung der Abschaltbedingungen; • IP-Schutzarten; • Einbau des Elektroinstallationsmaterials; • Art des Versorgungsnetzes (TN-System, IT-System, TT-System) und die daraus folgenden Anschlussbedin- gungen (klassische Nullung, Schutzerdung, erforderliche Zusatzmaßnahmen etc.). Zugelassene Leitungsquerschnitte zum Anschluss an den Wandthermostat sind: Starre Leitung: 0,12-0,50 mm Aus Gründen der elektrischen Sicherheit dürfen...
Inbetriebnahme All manuals and user guides at all-guides.com Installation Der Bus wird vom Homematic IP Wired Access Point (HmIPW-DRAP) gespeist. Weitere Informa- tionen dazu können Sie der Bedienungsanleitung des Wired Access Points entnehmen. Für die Installation gehen Sie wie folgt vor: •...
Inbetriebnahme All manuals and user guides at all-guides.com Montage in Mehrfachkombinationen Sie können den Wandthermostat sowohl mit dem mitge- lieferten Rahmen (A), als auch mit Rahmen anderer Her- steller verwenden oder die Elektronikeinheit (B) in einen Mehrfachrahmen integrieren. Bei der Montage in Mehr- fachkombinationen ist darauf zu achten, dass die Mon- tageplatte des Wandthermostats bündig neben bereits befestigte Montageplatten/Tragringen angebracht und...
Inbetriebnahme All manuals and user guides at all-guides.com Anlernen Bitte lesen Sie diesen Abschnitt erst vollständig, bevor Sie mit dem Anlernen beginnen. Detaillierte Informationen zu den Einrichtungs- und Steuerungsmöglichkeiten entnehmen Sie bitte dem Homematic IP Wired Systemhandbuch. Damit der Wandthermostat in Ihr System integriert wer- den und mit anderen Geräten kommunizieren kann, muss er zunächst angelernt werden.
Inbetriebnahme All manuals and user guides at all-guides.com Anlernen an die Homematic IP Cloud Für eine flexible Steuerung per kostenloser Smartphone- App können Sie den Wandthermostat an die Homema- tic IP Cloud anlernen (s. „5.4.3 Anlernen an die Home- matic IP Cloud per Wired Access Point“ auf Seite 24). Dabei ist es möglich, die Wired Geräte •...
Inbetriebnahme All manuals and user guides at all-guides.com gewünschten Kanal aus, an den Sie den Wand- thermostat anlernen möchten. Weitere Informa- tionen dazu können Sie der Bedienungsanleitung des Fußbodenheizungsaktors entnehmen. • Drücken Sie für 4 s auf die Systemtaste des Fuß- bodenheizungsaktors, bis die LED schnell oran- ge zu blinken beginnt.
Seite 27
Inbetriebnahme All manuals and user guides at all-guides.com • Klicken Sie auf den Button „Geräte anlernen“ im rechten oberen Bereich des Browserfensters. • Um den Anlernmodus zu aktivieren, klicken Sie im nächsten Fenster auf „HmIP Gerät anlernen“. Die Zentrale wird für 60 Sekunden in den Anlern- modus versetzt.
Seite 28
Bedien- und Konfigurationsaufgaben zur Verfügung, nachdem sie im Posteingang konfiguriert wurden. Weitere Informationen finden Sie im Homema- tic IP Wired Systemhandbuch unter www.eQ-3.de. Im Betrieb ohne aktiven Internetzugang wählen Sie die Option „Homematic IP Gerät ohne Inter- netzugang anlernen“.
Inbetriebnahme All manuals and user guides at all-guides.com finden Sie auf dem beiliegenden Sticker. Bitte be- wahren Sie den Sticker sorgfältig auf. 5.4.3 Anlernen an die Homematic IP Cloud per Wired Access Point Wenn Sie Ihre Homematic IP Wired Geräte flexibel per Smartphone-App steuern möchten, können Sie die Homematic IP Wired Geräte einfach an die Homematic IP Cloud anlernen.
Seite 30
Inbetriebnahme All manuals and user guides at all-guides.com scannen Sie den QR-Code. Die Gerätenummer finden Sie auf dem Aufkleber im Lieferumfang oder direkt am Gerät. • Warten Sie, bis der Anlernvorgang abgeschlossen ist. • Zur Bestätigung eines erfolgreichen Anlernvor- gangs leuchtet die LED (D) grün. Das Gerät ist nun einsatzbereit.
Betriebsmodi und Konfiguration All manuals and user guides at all-guides.com Betriebsmodi und Konfiguration Nach dem Anlernen und der Montage können Sie über das Konfigurationsmenü Einstellungen vornehmen, um das Gerät an Ihre persönlichen Bedürfnissen anzupassen. Gehen Sie dafür wie folgt vor: Drücken Sie lange auf das Stellrad (E), um das •...
Seite 33
Betriebsmodi und Konfiguration All manuals and user guides at all-guides.com Konfiguration des Fußbodenheizungs- aktors 6.10 Verbindungstest Automatikbetrieb Im Automatikbetrieb erfolgt die Temperaturregelung ge- mäß des eingestellten Heizprofils (s. „6.5.3 Heizprofil“ auf Seite 34). Manuelle Änderungen über das Stellrad (E) bleiben bis zum nächsten Schaltzeitpunkt aktiv. Danach wird das eingestellte Heizprofil wieder aktiviert.
Betriebsmodi und Konfiguration All manuals and user guides at all-guides.com Sie können das Ventil des Fußbodenheizungsak- tors vollständig schließen bzw. öffnen, indem Sie das Stellrad (E) bis zum Anschlag gegen den Uhr- zeigersinn bzw. mit dem Uhrzeigersinn drehen. Im Display wird entsprechend „OFF“ bzw. „On“ angezeigt.
Betriebsmodi und Konfiguration All manuals and user guides at all-guides.com welche Räume der Urlaubsmodus aktiviert wer- den soll: Auswahl „OnE“: Urlaubsmodus wird für den aktu- ellen Wandthermostat aktiviert. Auswahl „ALL“: Urlaubsmodus wird für alle Wandthermostate, die an den Fußbodenhei- zungsaktor angelernt sind, aktiviert. Bediensperre Die Bedienung am Gerät kann gesperrt werden, um das ungewollte Verändern von Einstellungen, z.
Betriebsmodi und Konfiguration All manuals and user guides at all-guides.com Programmierung der Heizprofile Unter diesem Menüpunkt können Sie Einstellungen für Ihre Heiz- bzw. Kühlprofile vornehmen und Heizprofile nach Ihren eigenen Bedürfnissen erstellen. • Wählen Sie durch Drehen des Stellrads das Sym- bol „...
Betriebsmodi und Konfiguration All manuals and user guides at all-guides.com 6.5.2 Heizprofilnummer Sie können zwischen den 6 folgenden, bereits vorkonfi- gurierten Profilen wählen. • Wählen Sie im Menüpunkt „Pr.nr.“ durch Drehen des Stellrads (E) die Nummer des gewünschten Profils aus und bestätigen Sie die Auswahl durch kurzes Drücken des Stellrads.
Seite 39
Betriebsmodi und Konfiguration All manuals and user guides at all-guides.com Samstag bis Sonntag Temp. 00:00 bis 06:00 Uhr 17,0 °C 06:00 bis 22:00 Uhr 21,0 °C 22:00 bis 23:59 Uhr 17,0 °C Profil 2 Vorkonfiguriert für Heizen per Fußbodenheizung Montag bis Freitag Temp.
Seite 40
Betriebsmodi und Konfiguration All manuals and user guides at all-guides.com Profil 4 Alternatives Kühlprofil 1 Montag bis Freitag Temp. 00:00 bis 06:00 Uhr 17,0 °C 06:00 bis 09:00 Uhr 21,0 °C 09:00 bis 17:00 Uhr 17,0 °C 17:00 bis 22:00 Uhr 21,0 °C 22:00 bis 23:59 Uhr 17,0 °C...
Betriebsmodi und Konfiguration All manuals and user guides at all-guides.com Profil 6 Alternatives Kühlprofil 1 Montag bis Sonntag Temp. 00:00 bis 06:00 Uhr 17,0 °C 06:00 bis 22:00 Uhr 21,0 °C 22:00 bis 23:59 Uhr 17,0 °C 6.5.3 Heizprofil Im Heizprofil lassen sich für jeden Wochentag des ge- wählten Heizprofils separat bis zu 6 Heizphasen (13 Schaltzeitpunkte) individuell einstellen.
Betriebsmodi und Konfiguration All manuals and user guides at all-guides.com bestätigen Sie die Auswahl durch kurzes Drücken des Stellrads. • Im Display wird die nächste Uhrzeit angezeigt. Sie können diese Zeit mit dem Stellrad verändern. • Wählen Sie durch Drehen des Stellrads die ge- wünschte Temperatur für den nächsten Zeitab- schnitt aus und bestätigen Sie die Auswahl durch kurzes Drücken des Stellrads.
Betriebsmodi und Konfiguration All manuals and user guides at all-guides.com • Stellen Sie durch Drehen des Stellrads Jahr, Mo- nat, Tag und Uhrzeit ein und bestätigen Sie durch kurzes Drücken des Stellrads. Offset-Temperatur Da die Temperatur am Wandthermostaten gemessen wird, kann es an einer anderen Stelle im Raum kälter oder wärmer sein.
Betriebsmodi und Konfiguration All manuals and user guides at all-guides.com • Wählen Sie durch Drehen des Stellrads „ACT“ für das Anzeigen der Ist-Temperatur, „SEt“ für das Anzeigen der Soll-Temperatur oder „ACtH“ für das Anzeigen der Ist-Temperatur und der aktuellen Luftfeuchtigkeit im Wech- sel aus und bestätigen Sie Ihre Auswahl durch kurzes Drücken des Stellrads.
Bedienung All manuals and user guides at all-guides.com keiten entnehmen Sie bitte der Bedienungsanleitung des Homematic IP Wired Fußbodenheizungsaktors. 6.10 Verbindungstest Sie können die Verbindung zwischen Ihrem Homema- tic IP Wired Wandthermostat und dem Homematic IP Wi- red Fußbodenheizungsaktor überprüfen. Bei dieser Über- prüfung sendet der Wandthermostat einen Schaltbefehl an den Fußbodenheizungsaktor und je nachdem in wel- chem Schaltzustand sich der Aktor befindet, schaltet er...
Fehlercodes und Blinkfolgen All manuals and user guides at all-guides.com verändern. Im Automatikbetrieb bleibt die ma- nuell eingestellte Temperatur bis zum nächsten Schaltzeitpunkt bestehen. Danach wird das ein- gestellte Heizprofil wieder aktiviert. Im manuellen Betrieb bleibt die Temperatur bis zur nächsten manuellen Änderung erhalten.
Seite 48
Fehlercodes und Blinkfolgen All manuals and user guides at all-guides.com Kurzes Datenübertra- Warten Sie, bis oranges gung die Übertragung Blinken beendet ist. 1x langes Vorgang Sie können mit grünes bestätigt der Bedienung Leuchten fortfahren. 1x langes rotes Vorgang Versuchen Sie es Leuchten fehlgeschlagen erneut.
Wiederherstellung der Werkseinstellungen All manuals and user guides at all-guides.com Wiederherstellung der Werkseinstellungen Die Werkseinstellungen des Geräts können wie- derhergestellt werden. Dabei gehen alle Einstel- lungen verloren. Um die Werkseinstellungen des Wandthermostats wie- derherzustellen, gehen Sie wie folgt vor: Drücken Sie für 4 s auf die Systemtaste (D), bis •...
Technische Daten All manuals and user guides at all-guides.com Reinigen Sie das Gerät mit einem weichen, sauberen, trockenen und fusselfreien Tuch. Verwenden Sie keine lösemittelhaltigen Reinigungsmittel, das Kunststoffge- häuse und die Beschriftung können dadurch angegriffen werden. Technische Daten Geräte-Kurzbezeichnung: HmIPW-WTH Versorgungsspannung: 24 V , +5 % -20 %, SELV...
Seite 52
Technische Daten All manuals and user guides at all-guides.com prüfung: 850 °C Temperatur Kugeldruck- prüfung: 125 °C PTI-Wert des Gehäuse- materials: IIIb mit 100 < CTI < 175 Technische Änderungen vorbehalten. Entsorgungshinweis Gerät nicht im Hausmüll entsorgen! Elektroni- sche Geräte sind entsprechend der Richtlinie über Elektro- und Elektronik-Altgeräte über die örtlichen Sammelstellen für Elektronik-Altgeräte zu entsorgen.
Seite 54
All manuals and user guides at all-guides.com Table of contents Information about this manual........47 Hazard information ............47 Function and device overview ........50 General system information ........52 Start-up ................52 Installation instructions ............. 52 Installation ................55 Installation in multiple combinations ......55 Teaching-in ................
Seite 55
All manuals and user guides at all-guides.com Selecting the desired temperature display .....72 Configuring the floor heating actuator ......73 6.10 Communication test ............73 Operation .................74 Error codes and flashing sequences ......75 Restore factory settings ..........76 10 Maintenance and cleaning ........... 77 Technical specifications ..........
Information about this manual All manuals and user guides at all-guides.com Information about this manual Please read this manual carefully before beginning op- eration with your Homematic IP Wired component. Keep the manual so you can refer to it at a later date if you need to.
Seite 58
Hazard information All manuals and user guides at all-guides.com Do not use the device if there are signs of dam- age to the housing, control elements or connect- ing sockets, for example. If you have any doubts, have the device checked by an expert. The device may only be operated in dry and dust- free environment and must be protected from the effects of moisture, vibrations, solar or other...
Seite 59
Hazard information All manuals and user guides at all-guides.com The device is part of the building installation. The relevant national standards and directives must be taken into consideration during planning and set-up. The device is intended for operation within the Homematic IP Wired bus only. The Homematic IP Wired bus is a SELV power circuit.
Function and device overview All manuals and user guides at all-guides.com Using the device for any purpose other than that described in this operating manual does not fall within the scope of intended use and shall invali- date any warranty or liability. Function and device overview The Homematic IP Wired Wall Thermostat offers time- controlled regulation of floor heating systems in connec-...
Seite 61
Function and device overview All manuals and user guides at all-guides.com Display overview (see figure 2): Set/actual temperature Humidity Warning about condensation Open window symbol Radio transmission Boost function Manual operation Automatic mode Holiday mode Heating Cooling Operating lock Setpoint temperature You will find a description of all symbols in section „6 Operating modes and configuration“...
All available functions provided by the system in combination with other components are described in the Homematic IP Wired Installation Guide. All cur- rent technical documents and updates are provided at www.eQ-3.com. Start-up Installation instructions Since the power of the bus is supplied by the Homematic IP Wired Access Point (HmIPW- DRAP) you will need to set-up a Homematic IP...
Seite 64
Start-up All manuals and user guides at all-guides.com Please note the insulation stripping length of the conductor to be connected, indicated on the de- vice. Please observe the hazard information in section „2 Hazard information“ on page 47 during in- stallation.
Seite 65
Start-up All manuals and user guides at all-guides.com sary, personal safety equipment; • Evaluation of measuring results; • Selection of electrical installation material for safeguard- ing shut-off conditions; • IP protection types; • Installation of electrical installation material; • Type of supply network (TN system, IT system, TT sys- tem) and the resulting connecting conditions (classical zero balancing, protective earthing, required additional measures etc.).
Start-up All manuals and user guides at all-guides.com Installation The bus is supplied by the Homematic IP Wired Access Point (HmIPW-DRAP). For further infor- mation, please refer to the operating manual of the Wired Access Point. For the installation, please proceed as follows: •...
Start-up All manuals and user guides at all-guides.com wall thermostat is seamlessly aligned to the already fixed mounting plate/retaining ring. Frames of the following manufacturers can be used: Manufacturer Frame Berker S.1, B.1, B.3, B.7 Busch Jaeger carat*, future linear*, solo*, Busch- axcent*, Busch-dynasty*, balance SI ELSO GIRA...
Seite 69
Start-up All manuals and user guides at all-guides.com enable it to communicate with other devices, you must teach it in first. The following set-up and control possi- bilities are available for the wall thermostat: Direct pairing You can directly connect the wall thermostat to the floor heating actuator.
Start-up All manuals and user guides at all-guides.com 5.4.1 Pairing with a Homematic IP Floor Heating Actuator You can cancel the pairing procedure by briefly pressing the system button (D) again. This will be indicated by the device LED (D) lighting red. If no teach-in operations are carried out, teach-in mode is exited automatically after 30 seconds.
Start-up All manuals and user guides at all-guides.com The device LED (D) lights up green to indicate that pairing has been successful. If pairing failed, the device LED (D) lights up red. Please try again. 5.4.2 Connecting to the CCU3 To enable software-based and comfortable control and configuration and for using the device in central control unit program, it has to be connected to the WebUI.
Seite 72
Start-up All manuals and user guides at all-guides.com • After establishing the power supply, the teach-in mode of the wall thermostat remains activated for 3 minutes. You can manually start the teach-in mode for an- other 3 minutes by pressing the system button (D) briefly (see figure 8).
All manuals and user guides at all-guides.com they have been configured in the inbox. You will find fur- ther information in the Homematic IP Wired Installation Guide, available for download at www.eQ-3.com. For operation without Internet connection, please select the option “Teaching-in of Home- matic IP device without Internet connection”.
Seite 75
Start-up All manuals and user guides at all-guides.com You can manually start the teach-in mode for an- other 3 minutes by pressing the system button (D) briefly (see figure 8). • Your device will automatically appear in the Homematic IP app. •...
Operating modes and configuration All manuals and user guides at all-guides.com Operating modes and configuration After teaching-in and mounting the device, you can in- dividually adjust the settings to your personal needs via the configuration menu. To do this, proceed as follows: Press and hold down the control wheel (E) to •...
Operating modes and configuration All manuals and user guides at all-guides.com Automatic mode In automatic mode, the temperature is controlled in ac- cordance with the set heating profile (see „6.5.3 Heating profile“ on page 70). Manual changes that are set via the control wheel (E) are activated until the next point at which the profile changes.
Operating modes and configuration All manuals and user guides at all-guides.com Holiday mode The holiday mode can be used if you want to maintain a fixed temperature for a certain period (e.g. during your holidays or a party). To activate the holiday mode, please proceed as follows: •...
Operating modes and configuration All manuals and user guides at all-guides.com touch). To activate the operating lock, please proceed as follows: • Select the symbol by turning the control wheel and confirm by pressing the control wheel briefly. • Turn the control wheel to select “On” in order to activate the operating lock or “OFF”...
Operating modes and configuration All manuals and user guides at all-guides.com (”OFF”) the optimum start/stop function. 6.5.1 Heating or cooling You can use your floor heating system to heat rooms dur- ing winter or to cool rooms during summer. • Select “HEAT”...
Seite 82
Operating modes and configuration All manuals and user guides at all-guides.com Profile 1: Pre-configured heating via radiator thermostat Monday to Friday Temp. 00:00 - 06:00 17.0 °C 06:00 - 09:00 21.0 °C 09:00 - 17:00 17.0 °C 17:00 - 22:00 21.0 °C 22:00 - 23:59 17.0 °C...
Seite 83
Operating modes and configuration All manuals and user guides at all-guides.com Profile 3: Alternative profile Monday to Sunday Temp. 00:00 - 06:00 17.0 °C 06:00 - 22:00 21.0 °C 22:00 - 23:59 17.0 °C Profile 4: Alternative cooling profile 1 Monday to Friday Temp.
Operating modes and configuration All manuals and user guides at all-guides.com Saturday to Sunday Temp. 00:00 - 06:00 23.0 °C 06:00 - 23:00 21.0 °C 23:00 - 23:59 23.0 °C Profile 6: Alternative cooling profile 1 Monday to Sunday Temp. 00:00 - 06:00 17.0 °C 06:00 - 22:00...
Operating modes and configuration All manuals and user guides at all-guides.com • Select the desired temperature for the start time by turning the control wheel and confirm by pressing the control wheel briefly. • The next time is shown in the display. You can change this time using the control wheel.
Operating modes and configuration All manuals and user guides at all-guides.com Offset temperature As the temperature is measured on the wall thermostat, the temperature distribution can vary throughout a room. To adjust this, a temperature offset of ±3.5 °C can be set. If a nominal temperature of e.g.
Operating modes and configuration All manuals and user guides at all-guides.com firm by pressing the control wheel briefly. Configuring the floor heating actuator You can use this menu item for configuring your Home- matic IP Wired Floor Heating Actuator. • Select the symbol by turning the control wheel and confirm by pressing the control wheel...
Seite 89
Operation All manuals and user guides at all-guides.com receiving the command. • Select the symbol by turning the control wheel and confirm by pressing the control wheel briefly. The connection test is carried out. Operation After configuration, simple operations are available di- rectly on the device.
Error codes and flashing sequences All manuals and user guides at all-guides.com Error codes and flashing sequences Error and Meaning Solution flashing codes Antenna Communica- Check the con- symbol flash- tion error to nection to the ing ( ) CCU/ CCU/ to floor heating floor heating...
Restore factory settings All manuals and user guides at all-guides.com Short orange Teach-in mode Please enter the flashing active last four numbers (every 10 of the device seconds) serial number for confirmation (see „5.4 Teaching-in“ on page 56). 6x long red Device defec- Please see your flashing...
Maintenance and cleaning All manuals and user guides at all-guides.com • Release the system button to finish the proce- dure. The device will perform a restart. After the restart, you can again integrate your device into your Homematic IP system. Maintenance and cleaning The product does not require any maintenance.
Seite 94
Technical specifications All manuals and user guides at all-guides.com Degree of protection: IP20 Protection class: Ambient temperature: 0 to 50 °C Dimensions (W x H x D): Without frame: 71 x 71 x 42 mm Including frame: 86 x 86 x 42 mm Weight: 87 g Method of operation:...
Seite 95
Technical specifications All manuals and user guides at all-guides.com Instructions for disposal Do not dispose of the device with regular domes- tic waste! Electronic equipment must be dis- posed of at local collection points for waste elec- tronic equipment in compliance with the Waste Electrical and Electronic Equipment Directive.
Seite 96
All manuals and user guides at all-guides.com Kostenloser Download der Homematic IP App! Free download of the Homematic IP app! Bevollmächtigter des Herstellers: Manufacturer’s authorised representative: eQ-3 AG Maiburger Straße 29 26789 Leer / GERMANY www.eQ-3.de...