Setting Date And Time (Dat) - eQ-3 EasyHome control Bedienungsanleitung

After inserting or replacing batteries the firmware version
number will be shown briefly. Accordingly, date and time will
be requested automatically. Settings can be changed with
the (+) and (-) buttons and confirmed with the OK button.
• Set the year, month and date and confirm each setting
with the OK button.
Year:
• Now set the time and confirm settings with the OK button.
Hours:
Once the time and date were entered, the wall thermostat
switches to normal operation.
If the wall thermostat was taught-in to the cube, the
current date and time will be transferred to the wall
thermostat automatically.
Date and time can be changed at any time via the
menu option "dAt" in the configuration menu.

7. Setting date and time (dAt)

Month and day:
Minutes:
33