Comfort And Reduced Temperature ( ); Set Boost Function; Boost , Bos) - eQ-3 EasyHome control Bedienungsanleitung

17.4 Comfort and reduced temperature (
The comfort ( ) and reduced ( ) temperature buttons
make switching between comfort and reduced temperature
simple and user friendly. The factory setting for the comfort
temperature is 21.0°C and the reduced temperature 17.0°C.
When using without Cube, the comfort and reduced tem-
perature can be changed via corresponding buttons as
follows:
• Press the comfort ( ) / reduced ( ) temperature button
for a few seconds.
• The display shows the respective symbol and the corre-
sponding comfort or reduced temperature.
• Change the temperature with the (+) and (-) buttons.
• Confirm setting with the OK button.
Even in Auto mode the temperature can be changed with
this button at any time. However, the change will only be
maintained until the next phase the timer programme starts.

17.5 Set boost function (

The Boost function can create the sensation of a rise in
room temperature to the human body. When activated the
radiator valve will immediately be adjusted to 80% valve
opening for 5 minutes (factory setting). The heating of a
room takes longer than 5 minutes but the radiated heat
from a radiator can be sensed immediately.
• To activate the Boost function press the OK button.
• The count-down in second intervals of the remaining
func tioning time (e.g "300" to "000") and
shown on the display.
46
, bOS)
BOOST
BOOST
)
will be