Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
TOF:
Setting the offset temperature
RES:
Restoring the factory settings
11. Display content in normal Mode
Switching time periods, operating Mode, target tempera-
ture and week day are displayed in normal Mode. The bars
for the switching time periods
of the weekly program are dis-
played for every second time
interval (see example under
„8.1 Weekly program: examp-
les").
12. Boost function
The Boost function uses the human perception of warmth.
When activated, the heating valve is immediately opened
to 80% for 5 minutes (factory setting). The heating of a
room takes longer than 5 minutes, but the heat given off
by the radiator can be felt immediately. If you are coming
home earlier and want to have heat quickly, or if you need
extra heat in the morning for a bath, then the Boost func-
tion will help you.
• Press the Boost key to activate the Boost function.
• The remaining duration of the function is counted down
in seconds („B299" to „B000").
• After these 5 minutes have elapsed, the actuator chan-
ges to the Mode which was previously active (Auto/Manu)
with the previously set temperature.
• The function can be deactivated early at any time by pres-
sing the key or activating the selector dial.
46
46
The Boost key has an immediate effect if the radiator
is covered (e.g. by a sofa). The „Window open" detec-
tion is deactivated during the Boost function.
13. Setting the holiday function
If a fixed temperature needs to be maintained during a
holiday or a party for a certain period of time, the holiday
function can be used.
• Press the Mode key briefly as often as necessary until the
Suitcase symbol (
) appears in the display.
• Set the time via the selector dial up to which the tempera-
ture is to be maintained and then confirm with the OK key
• Then set the date with the selector dial and confirm with
the OK key.
• Set the temperature with the selector dial and confirm
with the OK key. The display flashes as confirmation.
The set temperature is maintained until the time point which
has been set. After this the actuator goes into Auto Mode.
14. Comfortable temperature and
reduced temperature
The key for comfortable temperature / reduced tempera-
ture (
) provides for a convenient and simple switching
between these two temperatures. These have been set at
the factory at 21.0 °C (comfortable temperature) and 17.0
°C (reduced temperature). They can be adjusted as follows:
• Hold the key for Comfortable temperature/ reduced tem-
perature (
) for a long period.
• The Sun symbol (
) and the currently stored comfortab-
47
47
Quicklinks ausblenden:
Werbung
Kapitel
Inhaltsverzeichnis
Fehlerbehebung
