Switching Time/Day (T-D) Display; Switching Nominal/Actual Temperature (S-A) - eQ-3 EasyHome control Bedienungsanleitung

17.2 Switching time/day (t-d) display

The factory setting will show the time on the display. In the
menu the display can be switched to the date.
• Open the configuration menu by pressing the menu but-
ton for more than 3 seconds.
• Select the "t-d" menu item with the (+) and (-) buttons and
confirm with the OK button.
• Now set the format you want to show on the display
(date and time will switch on the display) with the (+)
and (-) buttons.
• Confirm setting with the OK button.

17.3 Switching nominal/actual temperature (S-A)

In the factory settings, the display will show the nominal
temperature. In the configuration menu, you can change
the display setting from nominal to acutal temperature.
• Open the configuration menu by pressing the menu button.
• Select the (S-A) menu item with the (+) and (-) buttons
and confirm with the OK button.
• Now set the format you want to show on the display („SEt"
for the nominal temperature and „ACt" for the actual tem-
perature) with the (+) and (-) buttons.
• Confirm setting with the OK button.
If the actual temperature is selected,
the display will disbplay „SEt" for 5
seconds on change of the nominal
temperature (or on change of mode).
Afterwards, the display automatically
changes back to actual temperature.
45