Information Displayed During Normal Operation - eQ-3 BC Bedienungsanleitung

With window sensor:
When a window sensor is used, the opening and closing of
a window is detected at the precise time it occurs. Whilst the
window is open, the temperature is reduced to the factory set-
ting of 12°C. When the window sensor detects the closing of
the window, all radiator thermostats installed in the room are
immediately reset to their original mode.
The open-window temperature and time can be set
via the software. Temperature fall detection without
a window sensor can also be deactivated (by setting
the duration to 0 minutes) via the software.
When a window sensor is taught in, the radiator ther-
mostat does not react to a temperature fall.

13. Information displayed during normal operation

The current temperature is displayed during normal opera-
tion, along with the mode. In the exam-
ple on the right, the radiator thermostat
is in automatic mode (Auto) and the
comfort temperature (
set. The antenna symbol (
that the connection to the taught-in component has been
established.
In case you use the radiator thermostat in combination with
a wall thermostat, the room temperature will be measured
by the wall thermostat.
44
) of 21.0°C is
) indicates