Teaching-Out Of Wireless Components (Unl) - eQ-3 EasyHome control Bedienungsanleitung

10.2. Teaching-in components at the
wall thermostat (without Cube)
Up to 8 radiator thermostats can be directly taught in at the
wall thermostat. These then take over the settings of the
wall thermostat (e.g. mode, temperature, weekly program-
me). The wall thermostat forwards all commands and set-
tings to the devices that have been taught in on it radially.
To teach-in your components proceed as follows:
• First switch the teach-in partner (e.g. the Radiator Ther-
mostat) according to teach-in mode.
• Now enable the teach-in mode on the wall thermostat by
pressing and holding down the OK button.
• The antenna symboll ( ) is displayed, along with the
teach-in time remaining in seconds. The teach-in time
is 30 seconds.
• After teaching-in was successfull, the wall thermostat
switches into the standard operating mode.

11. Teaching-out of wireless components (UnL)

During operation with the Cube, the wall thermostat end
the other devices are taught out via the local software in
the respective room.
During operation without the Cube you use the „UnL" func-
tion in the menu in order to unteach devices that have been
taught in at the wall thermostat (e.g. radiator thermostat).
All radio components are untaught simultaneously.
To unteach, proceed as follows:
• Select the "UnL" menu item with the (+) and (-) buttons.
38