eQ-3 EasyHome control Bedienungsanleitung Seite 43

• Press the Mode button for more than 3 seconds.
The display will show "Pro".
• Confirm the setting with the OK button. The display
will show "dAy".
• Select an individual weekday, all weekdays, the
weekend or the entire week with the (+) and (-) but-
tons (i.e. weekdays).
• Confirm setting with the OK button.
• Now set the end time of the first time period (i.e.
6:00 am for the period 0:00 – 6:00 am).
• Confirm setting with the OK button.
• With the (+) and (-) buttons select the chosen tem-
perature for the previously chosen time period (i.e.
17.0°C).
• Confirm setting with the OK
button.
• Repeat this procedure until
temperatures are stored for the
entire period between 0:00 and 23:59.
In Auto mode the selected week programme will be auto-
matically adopted by all taught-in Radiator Thermostats.
In Auto mode the temperature can be changed at any
time with the (+) and (-) buttons or comfort ( ) and redu-
ced temperature ( ) buttons. The adjusted temperature
will be maintained until the next phase in the timer pro-
gramme starts.
Programming directly on the device is only possible,
if the device is not taught-in to the Cube.
43