Connecting The Computers - Guntermann & Drunck miniMUX2 Installationsanleitung

Connecting the computers

Mouse PS/2
Keyb. PS/2 Monitor
Figure 4: Interfaces to connect the console devices
Connect a KVM connection cable to this interface.
CPU 1:
CPU 2: Connect a KVM connection cable to this interface.
IMPORTANT: KVM connection cables to connect a computer to the KVM switch
are available as PS/2 or as USB variant (see page 2).
Connect the computers to be operated to the KVM connection cables (see below).
»CPU« KVM connection cable:
graphics output.
Connect the purple plug to the computer's PS/2 keyboard interface.
Connect the green Mini-DIN plug to the computer's PS/2 mouse interface.
»CPU« KVM connection cable:
graphics output.
Connect the USB-A plug to one of the computer's USB interfaces.
Additional interface of the multichannel variant
Monitor 2
Mouse PS/2
Monitor
Keyb. PS/2
Figure 5: Interfaces to connect »Video channel 2« of both computers
VGA CPU 1.2: Use one of the supplied VGA-M/M video cables to connect this inter-
face to the second video output of the first computer.
VGA CPU 2.2: Use one of the supplied VGA-M/M video cables to connect this inter-
face to the second video output of the second computer.
CPU 1 CPU 2
Connect the 15-pin D-Sub plug to the computer's
Connect the 15-pin D-Sub plug to the computer's
VGA CPU 1.2 VGA CPU 2.2
CPU 1 CPU 2
Main Power
Main Power
G&D miniMUX2 · 6
Installation