Initiation; Status Displays - Guntermann & Drunck miniMUX2 Installationsanleitung

Initiation

After the KVM switch has been installed (see Installation on page 4 ff.), it can be
operated immediately.

Status displays

The LEDs on the front panel of the device enable you to control the operational status
at all time:
Section LED
CPU 1 ... 2 Active
Status
User Active
Status
Status Meaning
The KVM switch is currently active on this channel. 
on
All inputs are transmitted to this computer
off The channel is currently inactive.
on The computer is ready for operation.
off No computer connected or the computer is turned off.
on The keyboard was properly initialised.
blinking The LED is blinking after the device has been turned on
and until the keyboard has been initialised.
on The KVM switch is supplied with the necessary voltage.
The KVM switch is turned off or the necessary voltage 
off
cannot be supplied. If necessary, check the proper con-
nection of the power pack.
Initiation
.
G&D miniMUX2 · 8