Using Single Or Double Hotkeys - Guntermann & Drunck miniMUX2 Installationsanleitung

Configuration

Using single or double hotkeys

If many application programs with key combinations are operated on one computer
or if different G&D devices are used in one cascade, the number of available key
combinations might be restricted.
In such a case, it is appropriate to apply double hotkeys.
How to enable single or double hotkeys:
1. Press
Hotkey+Backspace
If the hotkey delay is active, press the key combination for seven seconds.
2. Press one of the setup keys listed below to enable the use of single or double
hotkeys:
S  enables single hotkeys
A  disables double hotkeys
1. Use the terminal emulator to establish a connection to the KVM switch
and connect the serial data cable to the Service socket.
2. Use the Arrow
3. Press the
Space
 enables single hotkeys
No
 disables double hotkeys
Yes
4. Press the
S
Depending on your settings, the active hotkey is converted into a double hotkey (or
vice versa):
Single Hotkey
17 · G&D miniMUX2
(default:
or Arrow keys to select the
key (repeatedly) to enable the use of single or double hotkeys:
key to save your settings.
Ctrl
Alt
Alt Gr
Win
Shift
) to enabled the setup mode.
Ctrl+Backspace
Double Hotkey
Double Hotkey
entry.
Ctrl+Shift
Alt+Shift
Alt Gr+Ctrl
Win+Ctrl
Shift+Win