Installation; Connecting The Console Devices - Guntermann & Drunck miniMUX2 Installationsanleitung

Installation

Connecting the console devices

Mouse PS/2
Keyb. PS/2 Monitor
Figure 2: Interfaces to connect the console devices
Plug the connection cable of the PS/2 keyboard in this socket.
Keyb. PS/2:
Plug the connection cable of the PS/2 mouse in this socket.
Mouse PS/2:
NOTE:
You can also connect a USB keyboard and/or USB mouse to the USB K/M
interfaces on the front panel of the device.
The PS/2 interfaces (on the back panel of the KVM switch) as well as the USB
interfaces on the front panel of the device can be used for connecting both console
keyboard and console mouse.
Connect the console monitor to this interface.
Monitor:
Additional interface of the multichannel variant
Mouse PS/2 Monitor 2
Monitor
Keyb. PS/2
Figure 3: Interfaces to connect the second console monitor
Monitor 2: Connect the second console monitor to this interface
5 · G&D miniMUX2
CPU 1 CPU 2
VGA CPU 1.2 VGA CPU 2.2
CPU 1 CPU 2
Main Power
Main Power