Switching Between The Computers; Switching Via Buttons; Switching Via Key Combinations - Guntermann & Drunck miniMUX2 Installationsanleitung

Switching between the computers

Switching between the computers
The user can either use the the buttons on the front panel of the device or key com-
binations to switch between different computers.
Keyboard and mouse inputs are transmitted to the active computer. The video sig-
nal of the active computer is displayed at the console monitor.

Switching via buttons

How to use buttons to switch to a certain channel:
 Press the button of the channel you wish to activate.

Switching via key combinations

How to use key combinations to switch to a certain channel:
 Press
Hotkey+Select key
The default settings allow you to switch between channels by pressing
select keys and
1
IMPORTANT:
Switching between the channels takes place if the pressed key combi-
nation is released.
NOTE:
If one of these key combinations interferes with a key combination of an
installed application program, the key combination of the KVM switch can be
adjusted (see page 18 ff.).
9 · G&D miniMUX2
on the console keyboard.
.
2
Ctrl and the