Configuration; Overview Of The Functions And Default Settings - Guntermann & Drunck miniMUX2 Installationsanleitung

Configuration

Configuration
The configuration of the KVM switch can optionally be changed in the setup mode
or in the setup menu:
 Enable the setup mode using the console keyboard. You can change the configura-
tion via special setup keys.
 The setup menu is operated with a terminal emulator and provides a user interface
to configure the device.

Overview of the functions and default settings

The following table lists functions that can be configured as well as their default set-
tings of the KVM switch.
Detailed description of the functions is given in the following pages:
Function
Using single or double hotkeys
Changing the single hotkey
Changing the double hotkey
Changing the select keys
Disabling/Enabling the hotkey delay
Resetting the defaults
Auto-accessing the first channel
(De)activating the switching via front buttons
(De)activating the switching via hotkeys
(De)activating the switching via step keys
Changing the scan code set of a PS/2 keyboard
Selecting the PS/2 keyboard type
Enabling or resetting a PS/2 mouse
Selecting the USB keyboard type
Basic operation of the setup mode as well as the setup menu is explained in the fol-
lowing pages.
All functions that can be configured for the KVM switch are described in detail from
page 15 ff.
11 · G&D miniMUX2
Default
single hotkeys
Ctrl
Ctrl+Shift
1 2
and
7 seconds
disabled
enabled
enabled
disabled
scan code set 2
standard
PC Multimedia
Page
17
18
19
20
15
16
21
22
23
24
26
25
27
28