Configuration Settings; Disabling/Enabling The Hotkey Delay - Guntermann & Drunck miniMUX2 Installationsanleitung

Configuration

Configuration settings

Disabling/Enabling the hotkey delay

In the default settings of the switch, the
key combination must be pressed for seven seconds to start the setup mode.
If you want to start the setup mode directly after having pressed the key combina-
tion, the hotkey delay can be disabled.
How to disable/enable the hotkey delay:
1. Press
Hotkey+Backspace
the setup mode.
If the hotkey delay is active, press the key combination for seven seconds.
2. Press one of the setup keys listed below to enable/disable the hotkey delay:
7  enables hotkey delay
8  disables hotkey delay
1. Use the terminal emulator to establish a connection to the KVM switch
and connect the serial data cable to the Service socket.
2. Use the Arrow
3. Press the
Space
 enables hotkey delay
Yes
 disables hotkey delay
No
4. Press the
S
15 · G&D miniMUX2
(default:
or Arrow keys to select the
key (repeatedly) to disable/enable the hotkey delay:
key to save your settings.
Hotkey+Backspace
) simultaneously to enable
Ctrl+Backspace
Hotkey Delay
(default: Ctrl+Backspace
entry.
)