Auto-Accessing The First Channel - Guntermann & Drunck miniMUX2 Installationsanleitung

Configuration

Auto-accessing the first channel

Usually, after turning on the device, the recently active channel is accessed. The set-
ting can be changed so that the computer connected to the first channel is automati-
cally accessed when the device is turned on.
How to disable/enable the automatic access of the first channel after booting:
NOTE: Use the setup menu to enable/disable the option to automatically access
the first channel after booting the device.
1. Use the terminal emulator to establish a connection to the KVM switch.
Now plug the serial data cable into the service socket.
2. Use the
Arrow
3. Press the
Space
 accesses the recently active channel after booting
No
 accesses channel 1 after booting
Yes
4. Press the S
21 · G&D miniMUX2
or keys to select the
Arrow
key (repeatedly) to select between the following options:
key to save your settings.
Select Ch.1 after Power up
entry.