Specifications - WIKA CPH6000 Betriebsanleitung

3. Specifications

3. Specifications
Specifications
GB
Sensor technology
Measuring range
Overpressure safety
Burst pressure
Accuracy of the measuring chain
Measuring range
Overpressure safety
Burst pressure
Accuracy of the measuring chain
Measuring range
Overpressure safety
Burst pressure
Accuracy of the measuring chain
Measuring range
Overpressure safety
Burst pressure
Accuracy of the measuring chain
Type of pressure
Pressure units
Active temperature compensation °C
Permissible ambient temperature °C
Calibration
1) Up to 10 reference pressure sensors can be supported on each instrument (up to 10 calibration data sets)
2) Calibrated at 23 °C and in vertical mounting position with pressure connection facing downwards.
{} Items in curved brackets are optional extras for an additional price.
12
ProcessCalibrator CPH6000
1 reference pressure sensor (interchangeable without
tools)
bar 0.25
bar 1.6
bar 2.4
0.025 % FS
bar 6
bar 35
bar 40
0.025 % FS
bar 160
bar 320
bar 1,000 1,200 1,700 2,400
0.025 % FS
bar 1,600 2,500 4,000 5,000
bar 2,300 3,500 5,000 6,000
bar 4,000 6,000 8,000 10,000 11,000
0.1 % FS
{In addition to the above-specified pressures; vacuum,
bi-directional ranges and absolute pressures are avail-
able}
{bi-directional ranges (±): minimum span 500 mbar, e.g.
-250 ... +250 mbar}
15 standard units and one freely programmable unit
0 ... 50
0 ... 50
3.1 calibration certificate per DIN EN 10204
optional: DKD/DAkkS calibration certificate
WIKA operating instructions ProcessCalibrator, model CPH6000
; optional: external operation via 1.2 m cable
1)
0.4 0.6 1
2 4 5
2.4 4.8 6
2)
10 16 25
35 80 80
42 96 96
2)
250 400 600
500 800 1,200
2)
2)
1.6 2.5 4
10 10 17
12 12 20.5
40 60 100
80 120 200
96 550 800
1,000
1,500
3,000
6,000
7,000