Important Device Settings For Calibration Using Calibration Mode; Unit And Resolution - WIKA CPH6000 Betriebsanleitung
Der prozesskalibrator typ cph6000 vereint die vorteile eines kompakten hand-held-
instrumentes mit der umfangreichen funktionalität eines labor-kalibrierinstrumentes.
hierdurch gestalten sich alltägliche aufgaben im feld wie messen, prüfen oder kalibrie
Vorschau ausblenden
Andere Handbücher für CPH6000:
- Betriebsanleitung (112 Seiten) ,
- Betriebsanleitung (112 Seiten)
Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6. Installation and mounting
6.3 Important device settings for calibration using calibration mode
Calibration date
The instrument has an integral real-time clock with date. The current date of a calibration
is stated later in the calibration certificate. Before starting a calibration you must ensure
GB
that the internal date of the CPH6000 is correct (see chapter 7.4.5 "SETUP additional
menu options: CPH-Configuration").
6.4 Unit and resolution
After selecting one of the main menu items (e.g. MEASURING, CALIBRATION or
SWITCH-TEST) from the "SETUP" menu (press "SETUP" key), using the menu
option "Unit", and its associated submenu respectively (move the cursor to "Unit" and
press the right or left arrow), you can set the unit and adjust its resolution (see chapter
7.3 "Operating modes").
Table of available units, including their conversion factors in relation the unit 'bar':
bar
mbar
hPa
psi
inHg (0 °C)
cmHG (0 °C)
MPa
kPa
Pa
mH
O (4 °C)
2
cmH
O (4 °C)
2
mmH
O (4 °C)
2
kg/cm
2
inH
O (60 °C)
2
mmH
O (0 °C)
2
30
1.00000E+00
1.00000E-03
1.00000E-03
6.89475E-02
3.37690E-02
1.33322E-02
1.00000E+01
1.00000E-02
1.00000E-05
9.80670E-02
9.80670E-04
9.80670E-05
9.80665E-01
2.48800E-03
1.33322E-03
WIKA operating instructions ProcessCalibrator, model CPH6000
Werbung
Kapitel
Inhaltsverzeichnis
