WIKA CPH6000 Betriebsanleitung Seite 57
Der prozesskalibrator typ cph6000 vereint die vorteile eines kompakten hand-held-
instrumentes mit der umfangreichen funktionalität eines labor-kalibrierinstrumentes.
hierdurch gestalten sich alltägliche aufgaben im feld wie messen, prüfen oder kalibrie
Vorschau ausblenden
Andere Handbücher für CPH6000:
- Betriebsanleitung (112 Seiten) ,
- Betriebsanleitung (112 Seiten)
Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
7. Commissioning, operation
7.4.5 SETUP additional menu items: CPH-Configuration
a
b
c
d
e
f
g
h
This menu section lists general instrument settings, such as:
a) Input possibility for an ambient temperature
b) Input possibility for a height difference between reference pressure sensor and test
item, used in the automatic correction (deduction of a head pressure)
c) Selection of the menu language (German/English/French/Spanish/Italian)
d) Date of the system clock (Year/Month/Day)
e) Time of the system clock (Hours/Minutes/Seconds)
f) Brightness of the backlighting of the display
g) Powersave function (automatic switch-off delay for backlight and internal 24 V test
item power supply).
If the instrument is idle for the set switch-off delay period (no keys pressed and
no digital communication), then the backlight and the 24 V test item power supply
will be switched off, until any key is pressed (except ON/OFF) or the instrument is
addressed over the digital interface.
h) Current battery level
At 10 % the low battery charge warning, "low BAT", is shown in the display.
WIKA operating instructions ProcessCalibrator, model CPH6000
Select menu item
Input via numerical keypad
Confirmation of the input
ENTER
(Clear deletes the input)
GB
57
Werbung
Kapitel
Inhaltsverzeichnis
