Labelling, Safety Marks; Product Label - WIKA CPH6000 Betriebsanleitung
Der prozesskalibrator typ cph6000 vereint die vorteile eines kompakten hand-held-
instrumentes mit der umfangreichen funktionalität eines labor-kalibrierinstrumentes.
hierdurch gestalten sich alltägliche aufgaben im feld wie messen, prüfen oder kalibrie
Vorschau ausblenden
Andere Handbücher für CPH6000:
- Betriebsanleitung (112 Seiten) ,
- Betriebsanleitung (112 Seiten)
Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2. Safety
GB
2.5 Labelling, safety marks
2.5.1 Product label
Input volt-
age/current
permissible
ambient tem-
perature
10
WARNING!
Follow the instructions listed below for charging the Lithium-Ion
batteries. Failure to do so may cause the Lithium-Ion batteries to
become hot, explode or ignite and result in serious injury.
To charge the Lithium-Ion batteries, only ever use the specified
■
WIKA battery charger.
Never connect the Lithium-Ion batteries directly to a mains plug or
■
to a car's cigarette lighter.
Never leave the Lithium-Ion batteries in or near fire, nor in direct
■
sunlight. If the Lithium-Ion batteries become hot, the built-in safety
device is activated and overcharging prevented. Heating the
Lithium-Ion batteries can damage the safety device and can thus
lead them to heat up further, to cease to work or to ignite.
WARNING!
Never continue to charge the Lithium-Ion batteries if they do not fully
recharge within the specified time. Doing so may cause the Lithium-Ion
batteries to become hot, explode or ignite.
WIKA operating instructions ProcessCalibrator, model CPH6000
For an explana-
tion of symbols,
see below
Output voltage/cur-
rent
Interface
Instrument version
Date of manufacture
Werbung
Kapitel
Inhaltsverzeichnis
