Specifications; Basic Information; Measuring Range; Switch Contacts - WIKA GDM-RC-100-T Betriebsanleitung

8. Dismounting, return ... / 9. Specifications
8.3 Disposal
Incorrect disposal can put the environment at risk.
Dispose of instrument components and packaging materials in an environmentally
compatible way and in accordance with the country-specific waste disposal regulations.
Do not dispose of with household waste. Ensure a proper disposal in
accordance with national regulations.

9. Specifications

Basic information

Measurement principle
Nominal size of the optical display
Specifications of the gas density monitor

Measuring range

Measuring range
Maximum overpressure
Minimum bursting
strength
Dial
Scale range
Scale graduation

Switch contacts

Switch model
Number of switches
Switching function
WIKA operating instructions, model GDM-RC-100-T
Reference gas measurement
100 mm
0 ... 10 bar abs. at 20 °C [68 °F] SF₆ gas
■
0 ... 12.5 bar abs. at 20 °C [68 °F] SF₆ gas
■
1.43 times the measuring range
30 bar
End of measuring 1.3 bar or 1.8 bar above the first switch point
range below the filling pressure
Single scale (divided into sections of different colours)
■
Double scale (divided into sections of different colours)
■
Triple scale (divided into sections of different colours)
■
Potential-free change-over contact
1 switch contact
■
2 switch contact
■
3 switch contact
■
4 switch contact
■
Up to 4 switch contacts possible as change-over contact
Change-over contact
EN
35