WIKA CPH6000 Betriebsanleitung Seite 55
Der prozesskalibrator typ cph6000 vereint die vorteile eines kompakten hand-held-
instrumentes mit der umfangreichen funktionalität eines labor-kalibrierinstrumentes.
hierdurch gestalten sich alltägliche aufgaben im feld wie messen, prüfen oder kalibrie
Vorschau ausblenden
Andere Handbücher für CPH6000:
- Betriebsanleitung (112 Seiten) ,
- Betriebsanleitung (112 Seiten)
Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
7. Commissioning, operation
7.4.3 SETUP additional menu items: ReferenceSensor
a
b
c
d
e
f
g
h
i
a) Sensor no:
Sensor number of the currently connected CPT6000 reference pressure sensor
b) R.-Start/Range-End:
Start of measuring range and end of measuring range of the currently connected
CPT6000 reference pressure sensor
d) Unit:
Basic pressure unit of the CPT6000 reference pressure sensor
d) Class:
Accuracy of the measuring chain of the CPH6000 with connected CPT6000 refer-
ence pressure sensor
e) Pressuretype:
Pressure type of the currently connected CPT6000 reference pressure sensor
(Gauge/relative pressure or absolute pressure)
f)
Overload:
Length of time for which the CPT6000 reference pressure sensor was unaccept-
ably overloaded.
If the value here is not equal to zero, then it is highly probable that
the instrument no longer meets its specified accuracy class. The only
solution for this is an immediate recalibration. (For absolute pressure
sensors < 1 bar this function is deactivated, since for this measuring
range atmospheric pressure already represents an overload)
WIKA operating instructions ProcessCalibrator, model CPH6000
..ReferenceSensor
Sensor no:
362A
R.-Start:
0.00
Range-End:
10.00
Unit:
%FS
0.025
Class:
Pressuretype:
Overload:
0 sec
Read
0.001
Ref-Value:
0.000
Offset:
2011/05/10
Cal-Dat.:
Reference sensor
bar
rel
GB
55
Werbung
Kapitel
Inhaltsverzeichnis
