10. Dismounting, return and disposal
10. Dismounting, return and disposal
GB
10.1 Dismounting
Only disconnect the test and calibration installations once the system has been
depressurised!
10.2 Return
When returning the instrument, use the original packaging or a suitable transport
package.
To avoid damage:
1. Wrap the instrument in an antistatic plastic film.
2. Place the instrument, along with the shock-absorbent material, in the packaging.
Place shock-absorbent material evenly on all sides of the transport packaging.
3. If possible, place a bag, containing a desiccant, inside the packaging.
4. Label the shipment as transport of a highly sensitive measuring instrument.
62
WARNING!
Residual media in the dismounted ProcessCalibrators can result in
a risk to persons, the environment and equipment. Take sufficient
precautionary measures.
WARNING!
Strictly observe the following when shipping the instrument:
All instruments delivered to WIKA must be free from any kind of hazar-
dous substances (acids, bases, solutions etc.).
Information on returns can be found under the heading "Service" on our
local website.
WIKA operating instructions ProcessCalibrator, model CPH6000