WIKA CPH6000 Betriebsanleitung Seite 56
Der prozesskalibrator typ cph6000 vereint die vorteile eines kompakten hand-held-
instrumentes mit der umfangreichen funktionalität eines labor-kalibrierinstrumentes.
hierdurch gestalten sich alltägliche aufgaben im feld wie messen, prüfen oder kalibrie
Vorschau ausblenden
Andere Handbücher für CPH6000:
- Betriebsanleitung (112 Seiten) ,
- Betriebsanleitung (112 Seiten)
Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
7. Commissioning, operation
g) Ref-Value:
Current measured value of the connected CPT6000 reference pressure sensor
h) Offset:
GB
This menu option only appears if the CPH6000's reference pressure sensor is an
absolute pressure sensor.
Through this menu option the measured value of the reference pressure sensor
can be adjusted. This should only be used, however, as close as possible to the
absolute zero, and using a reference that is at least 4 times more accurate.
i)
Cal-Dat.:
Calibration date of the CPT6000 reference pressure sensor (Year/Month/Day)
7.4.4 SETUP additional menu items: Ref. Sensor-list
a
b
c
The ProcessCalibrator supports up to 10 CPT6000 reference pressure sensors. These
are listed in this menu.
a) Currently connected CPT6000 reference pressure sensor
b) Sensor list of the supported CPT6000 reference pressure sensors (calibrated with
the instrument)
c) Date of the sensor which has been selected using the cursor (Calibration date:
Year/Month/Day)
56
..Ref. Sensor-list
362A
Current
----
01
362A
06
----
02
Rp52
07
----
03
Kd35
08
Rp56
----
04
09
----
05
10
----
R.-Start:
0.000
Range-End:
10.000
Unit:
Cal-Dat.:
2011/05/10
Class:
0.025
WIKA operating instructions ProcessCalibrator, model CPH6000
bar
Selection
of a listed sensor
Werbung
Kapitel
Inhaltsverzeichnis
