Maintenance, Repair And Disposal; Declaration Of Conformity; Test Standards And Regulations - IFM Electronic Ecomat 100 Handbuch

■ Data structure:
CR2102 InOutStruct
■ Purpose:
The current angle data of the two axes
are read. The data structure is assigned
to the function input "IO_DATA" via the
ADR operator.
■ Structure components
Name Data type
SlopeLong INT
SlopeLateral INT

Maintenance, repair and disposal

As the inclination sensor does not contain any components which must be main-
tained by the user, the housing must not be opened. The sensor may only be
repaired by the manufacturer.
The disposal must be carried out according to the corresponding national envi-
ronmental regulations.

Declaration of conformity

The CE marking is applied on the basis of the EMC directive EMC 89/336/EEC,
implemented in the standards EN 500 81-1 and EN 500 82-2 as well as the low
voltage directive NS73/23/EEC, implemented in the standard EN 61010.

Test standards and regulations

• Immunity to conducted interference
to ISO 7637-2, pulses 3a, 3b, 4, severity level 4, function state A
to ISO 7637-2, pulse 2, severity level 1, function state A
to ISO 7637-2, pulse 1, 5, severity level 1, function state A
• Immunity to interfering fields
to directive 95/54/EC at 30 V/m and EN 500 82-2 (CE)
• Interference emission
to directive 95/54/EC and EN 500 81-1 (CE)
Description
Current inclination angle of the longitudinal axis (X)
Current inclination angle of the lateral axis (Y)
INCLINATION SENSOR
TYPE CR2102 InOutStruct
STRUCT
SlopeLong: INT;
SlopeLateral: INT;
END_STRUCT
END_TYPE
CR2102
43
PAGE