Safety Instructions - IFM Electronic Ecomat 100 Handbuch

CR2102
INCLINATION SENSOR

Safety instructions

This description is part of the unit. It contains texts and drawings
concerning the correct handling of the controller and must be
read before installation or use.
Observe the information of the description. Non-observance of the notes,
operation which is not in accordance with use as prescribed below, wrong
installation or handling can result in serious harm concerning the safety of
people and plant.
The device may only be installed, connected and commissioned by qualified
personnel.
Disconnect the device externally before doing any work on it. If necessary,
also disconnect separately supplied output load circuits.
In the case of malfunctions or uncertainties please contact the manufacturer.
Tampering with the device can lead to considerable risks for the safety of
people and plant. It is not permitted and leads to an exclusion of any liability
and warranty claims.
Contents
Function and features
Technical data
Dimensions
Mounting
Electrical connection
Parameter and EMCY object overview
Operating indicators (status LED)
Object directory
Communication profile area; index 1000 to 1FFF
Manufacturer specific profile area; index 2000 to 5FFF
Standardised device profile area; Index 6000 bis 6FFF
Parameter setting and alignment of the sensor
Programming
Maintenance, repair and disposal
Declaration of conformity
Test standards and regulations
Terms and abbreviations
Connecting with 8-wire ifm sockets
24
PAGE
page 25
page 26
page 26
page 27
page 27
page 28
page 29
page 30
page 34
page 35
page 37
page 38
page 43
page 43
page 43
page 44
page 46