Connecting The Receiver - Auerswald COMfortel 1600 Inbetriebnahmeanweisungen

Preparation
11. Insert the RJ-45 connector of the power supply into the socket labelled with
lower side of the telephone.
Do not connect to the mains supply before the telephone is actually commissioned.
Abb. 6: Assembling and connecting the COMfortel Xtension300 key exten-
sion modules
Warning: Using the wrong power supply plug can cause life-threatening electric
shocks or can damage or destroy the device.
• For this reason, only use a power plug of type no. FW7577/EU/40.

Connecting the Receiver

1. Insert the RJ-10 connector at the longer, plane end of the spiral cord into the socket la-
belled with
2. Guide the cable to the outside using the corresponding cable channel.
3. Insert the other RJ-10 connector of the spiral cord into the socket on the receiver.
44
COMfortel 1600/2600 - Firmware V1.8 - COMfortel Set V3.10.0 - Setup V07 09/2016
on the lower side of the telephone.
on the