Commissioning The Answering Machine (Only Comfortel 2600) - Auerswald COMfortel 1600 Inbetriebnahmeanweisungen

Commissioning
• COMfortel 2600: Tap on OK.
The date and time as well as the name of the internal subscriber are displayed. The
telephone is now ready for use.
Note: If the date and time are not yet configured in the PBX, only the name and version
of the telephone are displayed.
Further Steps
• Configure the telephone according to your requirements. Carry out the configuration
either using the menu on the telephone display (see the Operation and Configuration
Instructions of the telephone) or using the PC software included in the package (recom-
mended; see
• If necessary, carry out a firmware update in order to extend the telephone with the newly
available functions (see
internet (see www.auerswald.de/service).

Commissioning the Answering Machine (only COMfortel 2600)

Requirements
• Standard SD or SDHC card with the following features:
– SD memory card specification 1.01 or SDHC memory card specification 2.00
– With a capacity of 8 GB
1. Insert the memory card with the contacts directed upwardly first into the slot marked with
on the bottom of the telephone.
When
card has been initialised and the required directory structure has been created.
As soon as
Inbound calls are accepted (at first without an announcement).
Notes:
The standard announcements for different answering machine functions are automati-
cally copied from the telephone to the memory card (only German and English).
48
COMfortel 1600/2600 - Firmware V1.8 - COMfortel Set V3.10.0 - Setup V07 09/2016
page 52).
page 54). Information about new features can be found in the
is shown at the bottom right of the display, this indicates that the memory
is shown instead of , the answering machine is ready to use.