Appendix; Querying The Firmware Version/Serial Number; Performing A Firmware Update - Auerswald COMfortel 1600 Inbetriebnahmeanweisungen

Appendix

Once you have put your telephone into operation and configured it, read this section on oper-
ation and configuration for additional useful information.

Querying the Firmware Version/Serial Number

1. Press the menu key.
2. Tap on information.
3. Scroll to the selection version.
The firmware versions of the telephone and the PBX are displayed.
4. Scroll to the selection serial number.
The serial number of the telephone is displayed.

Performing a Firmware Update

Important: Only available for operation on the PBXs COMpact 3000 analog/ISDN/VoIP,
COMpact 4000, COMpact 5000/R, COMpact 5010 VoIP, COMpact 5020 VoIP, COM-
mander 6000/R/RX, COMmander Basic.2/19" and COMmander Business/19". On the
other PBXs a manual firmware update can be performed instead.
Requirements
• The PBX connected to broadband Internet access
• The address of the update server configured in the PBX
• A DNS server and, if necessary, an HTTP proxy server configured in the PBX
1. Press the menu key.
2. Tap successively on settings > synchronisation > firmware update.
The firmware update is performed. After this, a message appears in the display in-
dicating whether the update was successful.
3. Confirm the message:
• Comfortel 1600: Tap on
54
COMfortel 1600/2600 - Firmware V1.8 - COMfortel Set V3.10.0 - Setup V07 09/2016
Appendix
.