Auerswald COMfortel 1600 Inbetriebnahmeanweisungen Seite 37

1
PBX
COMpact 3000 analog/
ISDN/VoIP
COMpact 2206 USB
COMpact 4410 USB
COMpact 4000
COMpact 5000/R
COMpact 5010 VoIP
COMpact 5020 VoIP
COMmander 6000/R
COMmander 6000 RX
*. The second value takes effect when operating some telephones with wall wart, Type no.
FW7577/EU/40.
Important: Only available for operation on the PBXs COMpact 4000, COMpact 5000/R
and COMmander 6000/R/RX (with Firmware 6.0A or later): During a call, the COMfortel
2600 allows you to accept another call and record it simultaneously on the local answer-
ing machine. When a second call is signalled as waiting, the PBX reserves the second
call channel of the internal S
phone at the same port cannot initiate a call, accept an incoming call and pick up a call.
Simultaneous call acceptance and recording by the local answering machine is not pos-
sible while another telephone is on a call at the same port. In order to ensure that the full
scope of functions is available, you should connect only 1 telephone per port.
COMfortel 1600/2600 - Firmware V1.8 - COMfortel Set V3.10.0 - Setup V07 09/2016
Max. power distribu-
tion of the total of all
internal S and U
0
ports
2.5 W
4 W
12 W (4 W per port)
24 W (4 W per port)
24 W (4 W per port)
8 W (4 W per port)
24 W (4 W per port)
60 W (4 W per port)
160 W (4 W per port)
port for this function. At this particular time, a second tele-
0
Max. no. of without wall
wart
P0
1
2
6 (2 telephones per port)
12 (2 telephones per port)
12/20* (2 telephones per
port)
4 (2 telephones per port)
12 (2 telephones per port)
30/64* (2 telephones per
port)
80/112* (2 telephones
per port)
Important Information
37