Configuring The Telephone And Answering Machine Using A Pc - Auerswald COMfortel 1600 Inbetriebnahmeanweisungen

Commissioning
Note: The following steps describe the installation on the operating systems Windows 7/
8/8.1. If using another operating system, refer to the documentation of your operating
system.
1. Start the installation file (comftelset.exe) on the PC.
The installation software is started.
2. Follow the instructions on the screen.
Note: During the installation of the COMfortel Set configuration software, standard
announcements for different answering machine functions are copied to the PC in three
different languages (German, English and Italian). These are announcements for call
acceptance STANDARD.wav, the announcement for remote access REMOTE.wav and
the announcement for message forwarding FORWARD.wav.

Configuring the Telephone and Answering Machine using a PC

Requirements
• COMfortel Set configuration software, version 3.0 or higher
• Answering machine put into operation
1. Start the COMfortel Set configuration software.
2. Successively click Options > Interface. Select the port you want to use (for example,
USB for connecting the telephone to the PC).
3. Open the telephone configuration. For this, successively click Open > Telephone.
Note: If there are several telephones, select the corresponding telephone in the Con-
nection options dialogue.
4. Enter the required PIN in the PIN entry dialogue.
Note: When using the PBXs COMpact 3000 analog/ISDN/VoIP, COMpact 4000,
COMpact 5000/R, COMpact 5010 VoIP, COMpact 5020 VoIP, COMmander 6000/R/
52
COMfortel 1600/2600 - Firmware V1.8 - COMfortel Set V3.10.0 - Setup V07 09/2016