Appendix
Once you have put your telephone into operation and configured it, check this section on
operation and configuration for additional useful information.
Displaying Status Information
You can display various status information (network, SIP accounts, firmware
version, etc.).
Press the menu key and open the View Status menu.
1.
Scroll to the required entry and press the OK key.
2.
Inserting the Lettering Label
Requirements
–
Lettering label. On
labels that can be cut out and labelled manually.
–
A flat tool (for example, a small flat-head screw driver)
Insert a flat tool (for example a small flat-head screwdriver) into the slot at
1.
the top of the transparent cover and remove the cover in upward direction.
Insert the lettering label.
2.
Reinsert the cover with the mat surface upwards.
3.
Cleaning the Telephone
Warning: Liquid that penetrates the casing can cause life-threatening elec-
tric shocks and can damage or destroy the device.
Only clean the casing of the device with a slightly moist cloth or an anti-
Caution: Cleaning agents can damage the surface.
Do not use caustic or solvent-containing cleaning agents.
50
Appendix
page 55
static cloth.
of these instructions, you will find lettering
COMfortel 1200 IP - Setup V03 09/2016