Proper Use; Technical Data - Auerswald COMpact 4000 Anleitung

Proper Use

Important: Auerswald products are not designed, manufactured, or
intended for use or resale, in environments that require fail-safe perfor-
mance, such as in the operation of life-support systems and/or nuclear facil-
ities. Our products can only be used for these purposes with prior written
permission from Auerswald in each individual case.
Important: Improper use may, for example, cause functional restrictions or
interference, the destruction of the device or, in a worst case scenario, per-
sonal injury.
 If you are still uncertain about how to use the product properly after
 Read the instructions for the device and keep them for future reference.
The COMpact 4000 is a telecommunication system; it will be referred to as PBX
in the following. This PBX connects various internal devices with various public
telecommunication networks, thereby enabling external and internal calls. For
this purpose, the PBX provides a number of different ports/interfaces.
The PBX is suitable for use in the commercial sector (small to midsize compa-
nies).
The PBX has a plastic casing for wall mounting. The PBX is intended to be oper-
ated in closed rooms. In addition, all of the devices connected to the system
must be located in the building.

Technical Data

Power Supply
Rated voltage
Rated current
Protection class
Power
Expansion modules
Environmental Requirements
Operation
Operating the modules
COMpact 4000 - Firmware V6.4 - Setup V02 07/2015
reading the chapter below, please contact your specialised dealer.
230 VAC +/-10 %, 50 Hz
Max. 0.5 A
I
Min. 6 W, max. 48 W
(depending on the configuration level of the PBX)
Power supply from the PBX
0 to +40° Celsius
Protect unit against direct sunlight!
Installed in the PBX casing
Important Information
25