Battery Pack Operation; Charging The Battery Pack - JVC GY-DV300 Bedienungsanleitung

PREPARATIONS

Battery Pack Operation

Use the optional battery pack BN-V428 for battery pack operation.

Charging the Battery Pack

AC outlet
CHARGE lamp 1
POWER lamp
CHARGE lamp 2
Attaching the Battery Pack on the GY-DV300
Connector
Detaching the Battery Pack from the GY-DV300
E-34
Power Supply Preparation (cont'd)
AC cord
AA-P30
Battery pack
Battery lock
release button
Before use the battery pack should be charged using
the optional AC Adapter/Charger AA-P30.
1.
Plug the AC cable of the AC Adapter/Charger
into an AC outlet. The POWER lamp illuminates.
2.
While pushing the battery pack down, slide it
in the direction of the arrow to mount it on the
AC Adapter/Charger. Charging starts, and the
Battery
CHARGE lamp blinks green. It changes to light
pack
steadily when charging is completed.
3.
When charging is completed, remove the
battery by sliding it in the opposite direction of
the mounting direction.
* For details, see the instruction manual for the AA-
P30.
If the DC cable is connected to the GY-DV300,
unplug the cable.
1.
Hold the battery pack with the connector side
facing the GY-DV300.
2.
While pressing the battery pack against the GY-
DV300, slide it downward to attach it to the GY-
DV300.
Ensure that the POWER switch on the GY-
DV300 is set to OFF.
1.
While pressing the battery lock release button,
slide the battery pack upward to remove it.
CAUTION:
Do not detach the battery pack while recording
is taking place.