Clock Adjust - JVC GY-DV300 Bedienungsanleitung

PREPARATIONS FOR OPERATION
CLOCK/TC menu screen
C LOCK T C /
T C P R E S E T . .
C L OC K AD J US T . .
D AT E S T Y L E D
T I M E S T Y L E 2
S EC D I S PL AY
ON
P AG E B AC K
CLOCK/TC menu screen
C LOCK T C /
T C P R E S E T . .
C L OC K AD J US T . .
D AT E S T Y L E D
T I M E S T Y L E 2
S EC D I S PL AY ON
P AG E B AC K
Date (Month, day, year)
CLOCK ADJUST menu screen
C L OCK ADJ US T
/ / Y Y ) 1 0 / 0 1 / 0 1
D A T E ( DD MM
I ME 0 0 : 0 0
T
PAG E BA CK
Time (Hour, min, sec)

CLOCK ADJUST

C L OCK ADJ US T
D A T E ( DD / MM / Y Y ) 2 1 / 3 0 /
T I ME 0 1 : 3 0
PAG E BA CK
Normal screen
Date time indication
(Selected on the
DISPLAY [2/2] menu screen)
E-42
Setting, Displaying and Recording
the Date and Time (cont'd)
1 Rotate the SELECT dial to align the cursor (f) with the item
to be set, and then press the SELECT dial.
● The setting area of the selected item starts blinking.
2 Rotate the SELECT dial to change the setting, and then press
/ D MM / Y Y
4 HO UR
the SELECT dial.
● The setting area stops blinking and the setting is entered.
5.
Display the screen for setting the date and time.
Rotate the SELECT dial to align the cursor (f) with the CLOCK
ADJUST item, and then press the SELECT dial.
● The CLOCK ADJUST screen appears.
6.
Set the date and time.
The blinking digit is the one to be set.
/ D / Y Y
MM
4 HO UR
1 When the SELECT dial is pressed, the blinking digit changes.
2 When the SELECT dial is rotated, the value of the blinking
digit changes.
When the SELECT dial is rotated upward, the value becomes
higher. When rotated downward, the value becomes smaller.
3 Repeat the procedure described in 1 and 2 above to set
the day, month, year, hours, minutes.
The digits indicating seconds cannot be set.
4 Press the SELECT dial in sync with a time signal to enter the
date and time precisely.
7.
When all the settings are completed, rotate the SELECT dial to
align the cursor with the PAGE BACK item, and then press the
SELECT dial.
● The CLOCK/TC menu screen returns.
8.
To return to the normal screen, use either of the following
methods.
Press the MENU button
or
Return to the TOP MENU screen and then select the EXIT item
0 1
from the TOP MENU screen before pressing the SELECT dial.
A