JVC GY-DV300 Bedienungsanleitung Seite 73

2. Adjusting the Gain Manually
+ 6 d B
S T B Y
Indication of set
gain value
● If the SELECT dial is pressed
while the set gain value is
displayed, the setting is returned
to the factory setting (0 dB).
● In the auto gain adjustment
mode, the GAIN button remains
inoperative.
1.
Press the GAIN button.
● The currently set gain value is shown for about 3 seconds on
the LCD screen and the viewfinder screen.
● The gain value can be set while the gain value is displayed.
S
6dB
2.
Rotate the SELECT dial within 3 seconds (while the gain value
M
is displayed) to set the gain. Rotating the dial upward or downward
increases or decreases the gain value in steps of 1 dB.
3.
Stop rotating the SELECT dial when the desired gain value is
indicated. The set value is displayed for about 3 seconds before
the setting is confirmed.
[Setting range: –3 dB to 0 dB to +18 dB]
● The set gain value is retained in the memory even if the power is
turned OFF.
To return to the auto gain adjustment mode, use either of the
following methods.
● Set the AE item to AUTO on the OPERATION menu screen
● Set the MODE item to AUTO on the TOP MENU screen.
In this case the shooting mode becomes the auto mode.
GAIN
button
GAIN
MENU
SELECT dial
SHUTTER
E-73