Playback Playback Of Tape - Jvc Gy-Dv300 Bedienungsanleitung

PLAYBACK
The recorded picture can be viewed on the LCD screen or in the viewfinder.
The playback sound is not output from the monitoring speaker of the GY-DV300.
Playback Procedure
● In the VTR playback mode, no
camera image is displayed on
the LCD screen or the
viewfinder.
● The operation mode during VTR
playback is indicated on the
LCD screen and the viewfinder
screen.
P L AY
VTR operation
mode indicator Indicator
showing the
recording speed
mode at the time
of recording.
(SP/LP)
E-80
Playback of Tape
POWER switch
1.
Set the POWER switch to "ON".
2.
Set the MODE switch to "VTR".
● The GY-DV300 enters the VTR playback mode.
3.
Insert the recorded videocassette.
● The cassette tape is loaded, and the STOP mode is engaged.
4.
Press the BAR (f/ w) button.
● Playback starts.
5.
Press the BAR (f/ w) button again to stop playback temporarily.
● The unit enters the still mode (still picture shown).
6.
To re-start playback, press the BAR (f/ w) button.
7.
To stop playback or still mode, press the AW (a) button.
● The unit enters the STOP mode.
MODE switch
BAR (f/ w)
CAM-A
button
BAR
AW (a)
button
AW
FWD
(g)
button
FWD
REV (h)
button
REV
MODE
CAM-B
VTR