JVC GY-DV300 Bedienungsanleitung Seite 50

SETTINGS BEFORE
SHOOTING
Setting Whether Phantom Microphone Should be used as External Microphone
SYSTEM [1/2] menu screen
E M 1 / 2 ] [
SY S T
M I C 1 I NP U T S E L X R
W I N D C U T M I C 1 OF F
W I N D C U T M I C 2 OF F
+ 4 8 V M I C 1
ON
+ 4 8 V M I C 2
ON
A UD I O MOD E 4 8 K
R E C MOD E
LONG P A US E T I ME 3 0 M I N
N E X T P AG E
PAG E B A CK
E-50
Audio Input Signal Selection (cont'd)
When a microphone (phantom microphone) requiring +48V DC
power supply is connected, set the +48V MIC1 or +48V MIC2 items
on the SYSTEM [1/2] menu screen.
L
+48V MIC1 : Setting for the microphone connected to the MIC 1
+48V MIC2 : Setting for the microphone connected to the MIC 2
S P
● Set to ON when a phantom microphone is used.
● Set to OFF when other microphone type than phantom
microphone is used.
CAUTION:
• Confirm that the +48V MIC1 or +48V MIC2 items are set to
OFF before connecting another microphone type than phantom
microphone.
• When the setting of the +48V MIC1/MIC2 item is changed,
noise will appear in the sound but this is normal.
input connector.
input connector.