JVC GY-DV300 Bedienungsanleitung Seite 28

CONTROLS,
INDICATORS AND CONNECTORS
VOL.
PLAY
No. Item
6
VTR mode indication
7
DV signal indication
(GY-DV301 only)
8 Audio sampling
frequency indication
9
Audio level meters
display
0
Date and time
indication
E-28
DV
y u i
Indicates status of VTR operation.
(STOP, PLAY, FF, REW, EJECT, STBY, FWD, REV, BSRH)
DV : Displayed when IEEE1394 signal is recorded from the DV
connector.
The audio sampling frequency by which the recording was made is
displayed during playback. (32K, 48K, 44.1K)
The playback audio level meters are displayed during playback.
These are not shown when the AUDIO LEVEL item is set to OFF on the
DISPLAY [2/2] menu screen.
Recorded data is show during playback, fast forward and rewind
operations.
The current data is shown in the stop mode.
The indication is enabled/disabled by selecting the TIME/DATE item on
the DISPLAY [2/2] menu screen. The display style is selected by setting
the DISP STYLE item.
When the date and time are not set, the indication will be as follows.
– – / – – / – –
– – : – – : – –
Indications on LCD Screen and
Viewfinder Screen (Cont'd)
o !0
Contents