14.2
Operation
14.2.1 switch on the machine
Switch the main power switch to position 1
INFO: The main switch has only its function when the
EMERGENCY STOP switch in the open state are located !
14.2.2 start the engine
To turn ON the lower switch button is pressed.
INFO:
When you start the EMERGENCY STOP switch must be in
the open state.
14.2.3 stop the engine
To stop the motor, press the OFF switch as well as EMERGENCY STOP switch.
14.2.4 Switch off the machine
The main power switch to the 0 position switch.
14.2.5 Saw blade height adjustment
To adjust the height of the saw blade to
adapt the material to raise or lower the bla-
de.
Unscrew the locking screw.
Pull the lever tube out and fix it with the
locking screw.
HOLZMANN MASCHINEN GmbH
Lever tube
www.holzmann-maschinen.at
Zimmerer Tischkreissäge und Rollbahn / carpenter table saw and roller stand
Main switch 0 - 1
EMERGENCY STOP
OFF switch
EMERGENCY STOP
switch
ON switch
locking screw
OPERATION
Seite 34
TS 400Z
TS 400ZAL