Before Each Use; Monthly; Cleaning; Transport - Holzmann TS 400Z Originalbetriebsanleitung

 The 6-point nut, flange and blade from the drive shaft
remove.
 Insert the new blade, flange and nut onto.
ATTENTION: Observe the direction of rotation of the saw
blade!

15.1.2 Before each use

Visually check that the riving knife has 3-8 mm distance from the saw blade.
Visual inspection of the saw blade guard hood.
Visually check box and cable inlet for damage.
Visual inspection of circular saw blade is in good condition

15.1.3 Monthly

Connecting parts and moving parts with a thin layer of oil wetting.
Verification functionality EMERGENCY OFF switch!

15.1.4 Cleaning

The use of solvents, harsh chemicals or abrasives results in damage to the machine!
Therefore: When cleaning only water and if necessary, use a mild detergent.
15.2

Transport

The TS 400Z is equipped with two transport wheels and 4 carrying handles.
Completely cut before transporting circular saw blade under the table!
Remove Before moving circular saw blade guard.
If possible carry, in their original box.
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
Zimmerer Tischkreissäge und Rollbahn / carpenter table saw and roller stand
N O T E
MAINTENANCE
Seite 39
TS 400Z TS 400ZAL