Trouble Shooting - Holzmann TS 400Z Originalbetriebsanleitung

TROUBLE SHOOTING

Disconnect the machine from the power supply prior to any checks performed at the
machine itself !
Trouble
Machine is not running
Machine heats up very fast
(3 min)!
Engine heats up after a
certain period of operation
HOLZMANN MASCHINEN GmbH
Possible cause
 Network connection is in-
correct
 Switch or a phase is broken
 400V possibly a current-
carrying phase was connec-
ted wrong.
 400V possibly a current-
carrying phase was connec-
ted wrong.
Overload of the engine by
one or more of the following
factors:
 blunt saw blade
 Too long or not appropriate
extension lead!
 hard material
 to high feed
to high continuous load high

humidity
www.holzmann-maschinen.at
Zimmerer Tischkreissäge und Rollbahn / carpenter table saw and roller stand
TROUBLE SHOOTING
Solution
 Have it checked by a special-
ist.
 And repair the faulty switch or
faulty phase
 Forsaking electrician the power
supply and check 3PH motor!
 Forsaking electrician the power
supply and check 3PH motor!
 Circular saw blade sharpen,
swap!
 See Section Electrical connec-
tion
 hard material out slowly.
 Take breaks after prolonged
use.
Save when the ambient tem-

perature or humidity Motor
particularly
TS 400Z
Seite 40
TS 400ZAL