Assembly; Preparatory Activities; Workplace; Mount Holder - Holzmann TS 400Z Originalbetriebsanleitung

13

ASSEMBLY

13.1

Preparatory activities

After receipt of the delivery, if all parts are in order. Report any damage or missing items imme-
diately to your dealer or the shipping company. Visible damage must also be recorded without
delay in accordance with the provisions of the warranty on the delivery note, otherwise the goods
shall be accepted as properly.

13.1.1 Workplace

Choose a suitable place for the machine.
Observe the safety requirements of Chapter 5 as well as the dimensions of the machine from
Section 4.3.
The location selected must ensure as well as the possibility for connection to an extraction system
an appropriate connection to the electrical grid.
Make sure that the floor can support the weight of the machine. The machine must be leveled on
all bases simultaneously.
You must also ensure all round a distance of at least 0.8 m around the machine. Before and be-
hind the machine must be made for necessary clearance for the supply of long workpieces.
When working on an ungrounded machine:
Serious injury due to electric shock in the event of a malfunction possible!
Therefore: Machine must be operated in a grounded power outlet.
13.2 Assembly

13.2.1 mount Holder

 The clamp is easily screwed with screws to the mounting plate
(B) beneath the work table.
 The bracket (A) is pushed onto the frame tube and tightened in
the correct position with the clamp.
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
Zimmerer Tischkreissäge und Rollbahn / carpenter table saw and roller stand
A T T E N T I O N
clamp
ASSEMBLY
A
Seite 30
TS 400Z TS 400ZAL