Safety Devices; Residual Risks - Holzmann TS 400Z Originalbetriebsanleitung

12.2

Safety devices

In designing the machine, the following protective devices are provided:
 Blade guard: This is fixed in order to avoid contact with the saw blade.
 EMERGENCY STOP switch. This is located at the front and the side of the machine. Make sure it
is functioning at regular intervals.
 Push stick: This is mandatory to use less than 120mm in blanks.
 Rip fence. Serves to guide the workpiece in the longitudinal cutting. It is made even of de-
usable material (aluminum).
 The setting of the rip fence is possible without the use of tools.
 Impeccable sharpened tools. The use of blunt tools is not permissible due to kickback, over-
loading the machine and produce poor surface during machining.
12.3

Residual risks

Also in compliance with all safety regulations and when used properly, the following residual
risks must be observed:
 Risk of injury to the hands / fingers through the circular saw blade during operation.
 Risk of injury from contact with live electrical components.
 Risk of injury due to breakage or being thrown out of the circular saw blade and circular saw
blade parts, especially in case of overload and in the wrong direction.
 Hearing damage unless precautions have been taken by the user of hearing protection.
 Risk of injury from kickback of the cut material, ejecting the cut material or portions thereof.
 Risk of injury to the eye by flying debris, even with goggles.
 Risk of inhalation of toxic wood dust in chemically treated workpieces.
These risks can be minimized if all safety rules are applied, the machine is properly maintained
and serviced the machine is performing as intended and in accordance operated by properly
trained personnel. Despite all the safety devices and remains her good common sense and your
corresponding technical suitability / training on the operation of a machine such as the table saw
TS 400Z is the most important safety factor!
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
Zimmerer Tischkreissäge und Rollbahn / carpenter table saw and roller stand
SAFETY
Seite 29
TS 400Z TS 400ZAL