Passing Through Of Band; Operation; Operation Instructions - Holzmann KAM 50M Betriebsanleitung

13.3.2 Passing through of band

 Loose knobs E and separate the 2 bodies so as to allow the strip to pass
 Pass the band under the non-return rod F and through knives U until it is under gluing
roller W
 Close th moving body G by means of knob H to the width of the band without clamping it
so that it is guided and secure it in this position with knobs E
14

OPERATION

Device to be operated in a perfect state only. Inspect the device visually every time it is to be
used. Check in particular the safety equipment, electrical controls, electric cables and screwed
connection for damage and if tightened properly. Replace any damaged parts before operating
the device.
14.1

Operation instructions

TO PREVENT THE DEVICE FROM DAMAGE, TURN IT DOWN
HOLZMANN MASCHINEN GmbH
Perform all machine settings with the machine being
disconnected from the power supply!
! ! ! ! A T T E N T I O N ! ! ! !
TO MINIMUM TEMPERATURE AND LET IT COOL DOWN
PLUGGED IN FOR 5 MINUTES.
www.holzmann-maschinen.at
W A R N I N G
MOBILES KANTENANLEIMGERÄT / EDGE BANDING MACHINE
OPERATION
Seite 25
KAM 50M