Setting The Miter Angle; Clamp Rip Fence; Clamping Lever - Holzmann TS 400Z Originalbetriebsanleitung

14.2.7 setting the miter angle

Turn the star screw (A) below the work table.
The complete unit can be adjusted in the desired angle.
On the inner round work table and on the work table are angle markings.
On the angular scale you can read the set angle.

14.2.8 Clamp rip fence

With the clamping lever of the rip fence can be
clamped.
The safety pin is to fold the rip fence pulled up and out.
Arrow
HOLZMANN MASCHINEN GmbH
table

clamping lever

safety pin
www.holzmann-maschinen.at
Zimmerer Tischkreissäge und Rollbahn / carpenter table saw and roller stand
rip fence
angular scale
OPERATION
Seite 36
TS 400Z TS 400ZAL