Operation; Delivery Content; Operation Instructions - Holzmann DBS 125 Betriebsanleitung

11

OPERATION

11.1

Delivery content

The machine is delivered pre-assembled.
For transport reasons, some parts of the machine can be assembled by the customer.
Check right after receiving the machine, whether all parts according to the parts list are complete
and without damage. Each visible defect and in particular wrong amounts and transport damages
must be clearly noted on the delivery documents, otherwise the goods shall be considered as
taken over and fully accepted under the sole responsibility of the customer.
11.2

Operation instructions

Device to be operated in a perfect state only. Inspect the device visually every time it is to be
used. Check in particular the safety equipment, electrical controls, electric cables and screwed
connection for damage and if tightened properly. Replace any damaged parts before operating
the device.
Please observe the following operating instructions so that their
work can be performed safely and has the expected success.
Check before starting work:
The cutting:
HOLZMANN MASCHINEN GmbH
Perform all machine settings with the machine being
disconnected from the power supply!
 All cables and plugs
 The function of the protective cover (check the spring!)
 Always use the proper, located in perfect condition saw blades.
 Always guide the machine with both hands.
 Do not exert too much pressure to the workpiece.
 Never lay up the saw with open protective cover.
www.holzmann-maschinen.at
W A R N I N G
A T T E N T I O N
N O T I C E
OPERATION
Seite 22
DBS 125