Operation; Operation Instructions; Connection Of Dust Collector To Machine; Start / Stop - Holzmann ABS 1080 Betriebsanleitung

14 OPERATION

Device to be operated in a perfect state only. Inspect the device visually every time it is to be
used. Check in particular the safety equipment, electrical controls, electric cables and screwed
connection for damage and if tightened properly. Replace any damaged parts before operating
the device.
14.1

Operation instructions

Perform all machine settings with the machine being
 Place the machine next to the woodworking machine in a way that it will
not interfere with your work!
 Start to work with the woodworking machine only until the dust collector
has reached full speed!
14.2

Connection of dust collector to machine

Dust collector plug ABS 1080: Ø 100mm
Ensure dust collector tubes to be composed of hardly inflammable material and antistatic.
The total distance between dust collector hood and machine dust collector hood shall not exceed
10 meters.
14.3

Start / Stop

Start: Press the green button ˝I˝
Stop: Press the red button ˝O˝
HOLZMANN Maschinen Austria
W A R N I N G
disconnected from the power supply!
www.holzmann-maschinen.at
H I N W E I S
OPERATION
Seite 24
ABS 1080