Aligning The Spray Jet; Eliminating Nozzle Blockages - Storch PowerCoat FF Handbuch

Aligning the spray jet

You can adjust the nozzle holder to align the spray jet horizontally or vertically. The spray jet must overlap with the pre-
vious one by 50% to ensure a uniform pattern.

Eliminating nozzle blockages

Never use the device if children are nearby. Never spray
people or animals with the spray gun; never point the
spray gun at people or animals. Keep your hands and
other parts of the body away from the outlet. For examp-
le, never try to stop material that is spraying out with any
part of the body.
1. To keep the nozzle free of clogging, lock the trigger
lock and pull the ventilation/pressure relief valve to
the up position to relieve the pressure.
2. Turn the nozzle round to cleaning position.
3. Point the spray gun into the catchment container;
unlock the trigger lock and move the ventilation/pres-
sure relief valve down to the spraying position. Press
the trigger to flush out the clogging.
4. Lock the trigger lock. Move the ventilation/pressure
relief valve to the up position to relieve the pressure,
and turn the spray nozzle back to spraying position.
135