Herunterladen Inhalt Inhalt Diese Seite drucken

Technical Data; Processable Materials; Warnings - Storch PowerCoat FF Handbuch

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1

Technical data

PowerCoat FF
Adjustable pressure range
Permitted operating pressure 117 bar
Weight
Dimensions (L x W x H)
Storage temperature range
Operating temperature range 4° C to 32° C
Storage humidity range
Relative humidity, non-condensing
Sound pressure level

Processable materials

Water-based materials. Cleaning with soapy water
Solvent-based materials with a combustion point of above 38° C
Use the appropriate materials outdoors and in well-ventilated rooms with a fresh air supply only. Observe the safety
instructions in this operating manual and issued by the material manufacturer.
WARNING
Only use water-based materials and materials featuring a flash point over 38°C. Do not use materials that
exhibit the warning "FLAMMABLE" on their packaging. For more information about the material, please ask
your distributor or specialist concerning the corresponding material datasheet.
Spraying certain materials may produce static charge that could place the user at risk of electric shock. In
case this happens, determine whether the coating material possesses a flash point above 38°C and that the
packaging does not feature the warning "FLAMMABLE" on it anywhere. In case electric shock is produced
nevertheless, then the material likely contains non-mineral paint fluids such as Xylol, Toluol, or Naphtha
which may also develop a static charge. Switch to an alternative material.

Warnings

Risk of fire and explosion (grounding)
Some solvent-based materials generate static electricity during spraying. Static electricity in the presence of paint or
solvent fumes represents a fire or explosion risk. Your spray gun has an earth cable that dissipates static electricity in
an earthed socket. The spray gun and all objects in the spraying area must be correctly earthed to provide protection
against static discharge, sparks or electric shocks.
Always connect the earth cable if you are spraying solvent-based materials that are flammable or generate static elec-
tricity.
If sparks occur due to static electricity, or if you feel an electric shock, stop working immediately and connect the spray
gun to a properly grounded sockets using the supplied ground cable.
34 to 103 bar
2.25 kg
34.9 x 14.0 x 24.6 cm
0° C to 50° C
0 to 95%
79.5 dBa
Charger
Charging duration
Power source
Rechargeable power pack
Voltage
Capacity
123
25 minutes at 80%,
40 minutes at 100%,
230 V
18 V DC, lithium ion
1.2 Ah, 21.6 Wh

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

69 76 00

Inhaltsverzeichnis